/  Precision Measuring Tools  /  Precision Hand Tools  /  

Indicators & Gages

  /  

Special Function Dial Gages

 /

683-2Z

683-2Z Internal Chamfer Gage 63685

683, 683M Internal Chamfer Gages, 0-90°
Inch Reading Dial Indicator Internal Chamfer Gage, 0-1/2" Range, 0-90 Angle

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1/2" Range In case of wear, the gage may be adjusted to read the proper number.

Features
Specifications
Parts
3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65
Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Made in America: Yes
  • Type: Chamfer Gage
  • Range (in): 0 - 1/2"
  • Dial Reading: For 0 -90 Degree Angles

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1BODY, CHAMFER GAGE24650-01
      2GAGE HEAD #683 0-1/223660-01
      3HEAD NUT, .50023676-01
      4SPRING, .250X.306X2.125X.028X2 323647-01
      5NUT,INDICATOR COLLET23654-01
      6CONTACT POINT,1 1/4"PT06677C1
      7INDICATOR FOR 68328357-01
      8•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
      9•SCREW, #4-48 SLOT X .231 LONGPT092841
      10•CAP, CASE STEM09903-01
      11•BEZEL CLAMP, PLASTIC23417-01
      12•SCREW, .140-40 CLAMP X .281 LONGPT111551
      13•RACK, .550 RANGE90990-01
      14•PIN, RACK GUIDE #25PT093421
      15•GUIDEPT093441
      16•SCREW, #1-64 SLOT X .154 LONGPT093482
      17•SPRING, .105X.125X.4688X.010PT066261
      18•BRIDGE/PLATE ASSEM.09908-01
      19••BRIDGE SUB ASSEMBLYPT094101
      20•••BRIDGE #2509414-01
      21•••BEARING, JEWEL #25PT094221
      22•••BEARING,JEWELPT09421(2)2
      23•••PIN, .094X.30009425-02
      24••PLATE SUB ASSEMBLY09429-01
      25•••PLATE09396-01
      26•••BEARING,JEWELPT094213
      27•••PIN, .093X.11109431-02
      28••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      29••SCREW, #1-64 SLOT X .148 LONG23449-01
      30••POST, HAIRSPRING09418-01
      31••PINION, HANDPT089731
      32••HAIRSPR GEAR ASSEM.PT92891
      33••GEAR, RACK ASSEMBLYPT093031
      34•SCREW, #3-56 SLOT X .556 LONGPT093522
      35•WSHR,.100X.187X.025PT093502
      36•BACK, INDICATOR #25PT261601
      37•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      38•BEZEL/ CRYSTAL ASSEMBLYPT994191
      39••BEZEL IND., PLASTICPT234161
      40••CRYSTAL, #25PT066221
      41•SPR WSHR,1.593X2.020X.006PT06673A1
      42•HAND, #25PT083081
      43•HAND, #25 TELL TALEPT066611
      44•DIAL,STAT. 0-90 I.D.23679-01
      45•DIAL,REVERSE 25-441RPT11040R1
      46CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov