Gage Block Sets

To order:

  1. Order by catalog number.
  2. Please specify if you require a Commercial Calibration or Master Calibration. A certificate of calibration provides individual readings on each block and provides traceability to NIST. Webber gage block calibrations are NVLAP Lab Code 200038-0 accredited. (We need the end user's name and address to place on the certificate.)
  3. Specify if you require special etched serial numbers. We can provide numbers up to a 6-digit maximum. (Our standard practice is to put the same etch number on each block in a set. Blocks are differentiated by their marked size.) If an etched serial number is not specified, we will assign a number that is a coded date.

Individual Gage Blocks

To order:

  1. Specify Shape (Rectangular, Square or Heavy Duty)
  2. Specify Material (croblox, steel or ceramic)
  3. Specify Unit of Measure (inch or metric)
  4. Specify the Size
  5. Specify Special Lengths, if applicable (Rectangular only)
    • Thin block sets (28 pc. inch and 17 pc. metric) are all 1.115" (28.3mm) long. Specify "SS" length.
    • .050", .100" and .150" blocks in inch 81-92 pc. sets are 1.380" long. Specify the long length, "L"
    • .100" blocks contained in the 36, 38 and 43 pc. sets are 1.380" long. Specify the Long length, "L"
  6. Specify Accuracy Grade
  7. Please specify if you require a Commercial, Master or Laboratory* Calibration. A certificate of calibration provides individual readings on each block and provides traceability to NIST. Webber gage block calibrations are NVLAP Lab Code 200038-0 accredited.
    8. * Commercial calibrations are included in the price of gage blocks. Master calibrations are done at extra cost. Laboratory calibrations are done at extra cost and are restricted to Webber croblox rectangular style gage blocks of grades LM, AA, GGG grades 0.5 and 1, and B89 grades 00 and K.
  8. Specify if you require special etched serial numbers. We can provide up to a 6-digit maximum. If an etched serial number is not specified, we will assign a number that is a coded date.

Relaxed Acceptance Rule Agreement

The buyer of Webber Products listed on this site or in our catalog agrees to the 100% Relaxed Acceptance Rule contained in ASME B89.7.3.1 (Guidelines for Decision Rules: Considering Measurement Uncertainty in Determining Conformance to Specifications.) Products may not be rejected by the purchaser unless his measurements exceed the published tolerances by more than his uncertainty of measurement.

Contact Us

Webber Gage Division
L.S. Starrett Co.
24500 Detroit Rd
Cleveland, OH 44145
Phone: (440) 835-0001
Fax: (440) 892-9555

Email Us