Indica tor Att achment DOVETAIL STYLE Replaces standard scriber. Provides means to attach dovetail equipped test indicators or electronic probes to height gages. Allows indicator to be used to ensure the down pressure on the part is the same as the original set zero position. Stem-Mount Indica tor Att achment for Height Gages This attachment replaces the standard scriber and provides a way to mount dial indicators or LVTD style probes having 3/8" diameter shafts onto your height gage. By using the lower stem of the indicator as an attachment point, the indicator can be used to guarantee the amount of down pressure on the part is the same as the original set zero position. Straight Scribers for St arrett Height Gages* All steel scribers are hardened to approximately HRC 62 and have a rounded tip which cuts sharp, clear lines smoothly, with less pressure, on any material. Circular Carbide Scribers* This circular scriber cuts a sharper, cleaner line with less pressure than any other scriber. It resists breakage and chipping but can be rotated for wear. 3259-AC Digit al Height Gage Scriber Carrier Holder Scriber carrier for use with 3259 Height Gages to allow attachment of standard quarter inch by half inch tall accessories. *Starrett Originals Height Gage Accessories Straight Scribers for Starrett Height Gages Part No. EDP Point Size Fits Starrett Height Gage No./Size PT14343 71511 Hardened Tool Steel 1/4 x 1/2 x 3" (6.4 x 12.7 x 75mm) 254 12", 18", 24", 300mm, 450mm, 600mm 254 Metric and English 259 18" and 24" PT13816 52367 1/4 x 1/2 x 6" (6.4 x 12.7 x 150mm) PT13817 52368 1/4 x 1/2 x 10" (6.4 x 12.7 x 250mm) PT16566 72288 Hardened Tool Steel 5/8 x 3/8 x 3-5/8" 254 36", 48", 60", 72",900mm PT13791 71460 Hardened Tool Steel 3/16 x 25/64 x 2-3/4" (4.8 x 10 x 69.9mm) 255 8",12",18",300mm,450mm PT22357 12295 Carbide 1/4 x 7/16 x 3" (6.4 x 11.1 x 75mm) 3752 Circular Carbide Scribers Part No. EDP Point Size Fits Starrett Height Gage No./Size PT27724 67185 Circular Carbide 1/4 x 1/2 x 3" (6.4 x 12.7 x 75mm) 25412",18",24",300mm,450mm,600mm 254 Metric and English 259 18", 24" PT27708 67186 1/4 x 1/2 x 6" (6.4 x 12.7 x 150mm) PT27710 67187 Circular Carbide 3/16 x 25/64 x 2-3/4" (4.8 x 10 x 69.9mm) 255 8", 12", 18", 300mm, 450mm PT27950 67015 Circular Carbide 1/4" (6.4mm) Diameter Shank 2000, 2001 Altissimo PT28131 67007 Circular Carbide 1/4 x 7/16 x 3" (6.4 x 11.1 x 75mm) 3752, 752 3259-AC Digital Height Gage Scriber Carrier Holder Cat. No. EDP Description 3259-AC 69859 Digital height gage scriber carrier holder Stem-Mount Indicator Attachment for Height Gages Part No. EDP Description PT99441 52991 Stem-mount indicator attachment Dovetail Style Indicator Attachment Part No. EDP Description PT99454 68713 Indicator attachment, dovetail style 3259-AC PT99441 PT99454 PT27950 121 starrett.com H eight G ages New!