There is a newer version of this product available

1101-42-1 Dial Indicator Diameter Gage

1101,1101M Dial Indicator Diameter Gages
36-42” Length Range

Dial Indicator Diameter Gages measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master. Each gage consists of a strong rectangular box beam with a sensitive gaging contact at one end and a reference gaging contact at the other. The 1101 gages allow for measurement beyond the size range of our 1102 models. Each gage adjusts a full 6" or 150mm. The contact carriers are vertically adjustable to handle various work depths. Special contacts are available. This tool has dowel (line) contacts at one end of the gage feet, and a button (point) contact gage at the other end of the feet. These can be reversed as needed and the gaging depth can be set within a range of 2-3/4" or 70mm. This gage should be checked against our 1126 Master for a precise reference standard during production gaging. Range: 36-42", Graduation: .0001"

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.


Contact Starrett

Features

  • The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
  • There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
  • Gage depth is set by adjusting the gage feet up or down
  • A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
  • The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
  • Unless otherwise specified, the dial indicator sent with the gage reads in .0005" increments with a total range of ±.030"
  • The dial has a double row of graduations reading in opposite directions – minus in red and plus in black

Specifications

  • Range (in): 36-42"
  • Graduations (in): .0001"

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1GAGE,DIAL 36-42" RAN30274-01
      2•BLOCK, REST ASSEMBLY30217-01
      3•NUT, TEE30216-01
      4•ROD, SEN. CONTACT30207-01
      5•BLOCK, IND. CONTACT30262-01
      6•CAP, END30226-02
      7•HOUSING, INDICATOR30235-01
      8•NUT, TEE SLOT30237-01
      9•BEAM, GAGE 36-42"30201-421
      10•TRANS, REED ASSEMBLY30202-01
      11•SCREW, #8-32 BHCS X .375 LONG16563-09
      12•BLOCK, REF CONTACT30215-01
      13•SCREW, #10-32 BHCS X .574 LONG30247-04
      14•BAR, CONTACT #110130214-01
      15•CONTACT POINT, 1/4"PT072152
      16•CONTACT POINT,#7PT06632-72
      17•RING, PRELOAD ACT30203-01
      18•SCREW, .125-40 SLOT X .261 LONG08457-02
      19•PRELOAD SUB ASSEMBLY30225-01
      20••PLUNGER, GAGE SPRING30147-01
      21••SPR, .217X.182X1.9730251-01
      22•SCREW, #4-40 BHCS X .250 LONG30117-04
      23•NUT,#10-32 TEE30254-01
      24•WSHR,.201X.308X.062530255-01
      25•SPR WSHR, .206X.37230238-05
      26•SCREW, #10-32 BHCS X .375 LONG30250-01
      27INDICATOR,25-611-62031446-11
      28•SCREW, #1-64 SLOT X .08206839-01
      29•CASE SUB ASSEMBLY22702-01
      30•SCREW, #4-48 SLOT X .231 LONGPT092841
      31•CAP, CASE STEMPT093571
      32•SCREW, .140-40 CLAMP X .281 LONGPT111551
      33•BEZEL CLAMP, PLASTIC23417-01
      34•RACK, .200 RANGEPT094801
      35•PIN, RACK GUIDE #25PT068481
      36•GUIDE09347-01
      37•SCREW, #1-64 SLOT X .154 LONGPT093482
      38•SPR, RACK.105X.125X.25024575-01
      39•BRIDGE/PLATE ASSEM.11612-01
      40••BRIDGE SUB ASSEMBLY09400-01
      41•••BRIDGE #2509408-01
      42•••BEARING, JEWEL #25PT094221
      43•••BEARING,JEWELPT094213
      44•••PIN, .094X.30009425-02
      45••PLATE SUB ASSEMBLY09437-01
      46•••PLATE09389-01
      47•••BEARING,JEWELPT094214
      48•••PIN, .093X.11109431-02
      49••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      50••SCREW, #1-64 SLOT X .148 LONG23449-01
      51••POST, HAIRSPRING09418-01
      52••PINION, HANDPT089731
      53••HAIRSPR GEAR ASSEM.PT092881
      54••GEAR, RACK ASSEMBLYPT092991
      55••GEAR, INTERMEDIATE ASSEM.PT092951
      56•SCREW, #3-56 SLOT X .556 LONGPT093522
      57•WSHR,.100X.187X.025PT093502
      58•BEZEL & CRYSTALPT994191
      59••BEZEL IND., PLASTICPT234161
      60••CRYSTAL, #25PT066221
      61•SPR WSHR,1.593X2.020X.006PT06673A1
      62•HAND, #25PT083081
      63•HAND, #25 TELL TALEPT066611
      64•DIAL,STAT 25-611-620J11620-01
      65•DIAL, MOV 25-111-63011621-01
      66•CONTACT POINT, 1/4"PT072151
      67SCREW, .125-40 SLOT X .261 LONG08457-0(2)2
      68SCREW, #4-40 BHCS X .250 LONG30117-0(2)2
      69SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      70BACK, #8413460-01
      71NAMEPLATE30291-42-11

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov