There is a newer version of this product available

69026

1101M-1200-2 Dial Indicator Diameter Gage 69026

Dial Indicator Diameter Gages measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master. Each gage consists of a strong rectangular box beam with a sensitive gaging contact at one end and a reference gaging contact at the other. The 1101 gages allow for measurement beyond the size range of our 1102 models. Each gage adjusts a full 6" or 150mm. The contact carriers are vertically adjustable to handle various work depths. Special contacts are available. This tool has dowel (line) contacts at one end of the gage feet, and a button (point) contact gage at the other end of the feet. These can be reversed as needed and the gaging depth can be set within a range of 2-3/4" or 70mm. This gage should be checked against our 1126 Master for a precise reference standard during production gaging. Range: 1050-1200mm, Graduation: .002mm

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.


Contact Starrett

Features

  • The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
  • There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
  • Gage depth is set by adjusting the gage feet up or down
  • A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
  • The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
  • Unless otherwise specified, the dial indicator sent with the gage reads in .0005" increments with a total range of ±.030"
  • The dial has a double row of graduations reading in opposite directions – minus in red and plus in black

Specifications

  • Range (mm): 1050-1200mm
  • Graduations (mm): .002mm

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1GAGE,DIAL 42-48" RAN30275-01
    2•BLOCK, REST ASSEMBLY30217-01
    3•NUT, TEE30216-01
    4•ROD, SEN. CONTACT30207-01
    5•BLOCK, IND. CONTACT30262-01
    6•CAP, END30226-02
    7•HOUSING, INDICATOR30235-01
    8•NUT, TEE SLOT30237-01
    9•BEAM, GAGE 42-48"30201-481
    10•TRANS, REED ASSEMBLY30202-01
    11•SCREW, #8-32 BHCS X .375 LONG16563-09
    12•BLOCK, REF CONTACT30215-01
    13•SCREW, #10-32 BHCS X .574 LONG30247-04
    14•BAR, CONTACT #110130214-01
    15•CONTACT POINT, 1/4"PT072152
    16•CONTACT POINT,#7PT06632-72
    17•RING, PRELOAD ACT30203-01
    18•SCREW, .125-40 SLOT X .261 LONG08457-02
    19•PRELOAD SUB ASSEMBLY30225-01
    20••PLUNGER, GAGE SPRING30147-01
    21••SPR, .217 X .182 X1.9730251-01
    22•SCREW, #4-40 BHCS X .250 LONG30117-04
    23•NUT,#10-32 TEE30254-01
    24•WSHR,.201X.308X.062530255-01
    25•SPR WSHR, .206X.37230238-05
    26•SCREW, #10-32 BHCS X .375 LONG30250-01
    27SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    28BACK, #8413460-01
    29SCREW, .125-40 SLOT X .261 LONG08457-0(2)2
    30SCREW, #4-40 BHCS X .250 LONG30117-0(2)2
    31NAMEPLATE30291-1200-21
    33IND,25-161-618 .002M31454-11
    34•SCREW, #1-64 SLOT X .08206839-01
    35•SCREW, .140-40 CLAMP X .281 LONGPT111551
    36•BEZEL CLAMP, PLASTIC23417-01
    37•GUIDE09347-01
    38•SCREW, #1-64 SLOT X .154 LONGPT093482
    39•SPR, RACK.105X.125X.25024575-01
    40•BRIDGE PLATE ASSEMBLYNOT AVAILABLE1
    41••PLATE SUB ASSEMBLY09437-01
    42•••PLATE09389-01
    43•••BEARING,JEWELPT094214
    44•••PIN, .093X.11109431-02
    45••BRIDGE SUB ASSEMBLY09400-01
    46•••BRIDGE #2509408-01
    47•••BEARING, JEWEL #25PT094221
    48•••BEARING,JEWELPT094213
    49•••PIN, .094X.30009425-02
    50••PINION, HANDPT089731
    51••GEAR, INTERMEDIATE ASSEM.PT092951
    52••GEAR, RACK ASSEMBLY11266-01
    53••SCREW, #3-56 SLOT X .263 LONG (BLACK)23447-04
    54••HAIRSPR GEAR ASSEM.PT092881
    55••POST, HAIRSPRING09418-01
    56••SCREW, #1-64 SLOT X .148 LONG23449-01
    57•SCREW, #3-56 SLOT X .556 LONGPT09352(2)2
    58•WSHR,.100X.187X.025PT093502
    59•BEZEL & CRYSTALPT994191
    60••BEZEL IND., PLASTICPT234161
    61••CRYSTAL, #25PT066221
    62•SPR WSHR,1.593X2.020X.006PT06673A1
    63•HAND, #25PT083081
    64•HAND, #25 TELL TALEPT066612
    65•DIAL,STAT .002mm91563-01
    66•DIAL,MOV .002mm91564-01
    67•RACK,5mm RANGE91356-01
    68•CASE SUB ASSEMBLY22702-01
    69•SCREW, #4-48 SLOT X .231 LONGPT092841
    70•CAP, CASE STEMPT093571
    71•PIN, RACK GUIDE #25PT068481
    72•CONTACT POINT, 1/4"PT072151

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov