/  Precision Measuring Tools  /  Precision Hand Tools  /  

Height Gages

  /  

Other Height Gages

 /

252Z-48

There is a newer version of this product available

3754-24/600 Electronic Height Gage
The Starrett 3754 Electronic Height Gage is a full featured, versatile and economic solution for most height measurement applications.
* Not actual product image

252Z-48 Height Transfer Gage 51217

252 Height Transfer Gages
Height Transfer Gage, 0 - 48"/0 - 1200mm Range

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

Features
Specifications
Parts
3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65
Contact Starrett

Features

  • Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
  • Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
  • Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
  • Hand-fitting base design for sure-grip handling and easy movement
  • Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
  • Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
  • Thumb screw allows slide to be locked
  • Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
  • A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
  • The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
  • Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod

Specifications

  • Made in America: Yes
  • Type: Height Transfer Gage
  • : Base Size (Approximate) 9" L x 6" W (225mm x 150mm)
  • Range (in): 0-48"
  • Range (mm): 0-1200mm

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov