63686

683-3Z Internal Chamfer Gage 63686

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1" Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (in): 0 - 1"
  • Graduations (in): .001"
  • Dial Reading: For 0 -90 Degree Angles

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1BODY-CHAMFER GAGE23673-01
    2STEM INSERT24660-01
    3GAGE HEAD #683 0-1"23664-01
    4HEAD NUT, 1.00023677-01
    5SPR, .640X.716X2.500 COMPRESSION23684-01
    6CONTACT, BALL ENG 4-48, 3mm DIA, BLACK01761-01
    7NUT,INDICATOR COLLET23654-01
    8INDICATOR FOR 68328357-01
    9•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    10•SCREW, #4-48 SLOT X .231 LONGPT092841
    11•CAP, CASE STEM09903-01
    12•BEZEL CLAMP, PLASTIC23417-01
    13•SCREW, .140-40 CLAMP X .281 LONGPT111551
    14•RACK, .550 RANGE90990-01
    15•PIN, RACK GUIDE #25PT093421
    16•GUIDEPT093441
    17•SCREW, #1-64 SLOT X .154 LONGPT093482
    18•SPRING, .105X.125X.4688X.010PT066261
    19•BRIDGE/PLATE ASSEM.09908-01
    20••BRIDGE SUB ASSEMBLYPT094101
    21•••BRIDGE #2509414-01
    22•••BEARING, JEWEL #25PT094221
    23•••BEARING,JEWELPT09421(2)2
    24•••PIN, .094X.30009425-02
    25••PLATE SUB ASSEMBLY09429-01
    26•••PLATE09396-01
    27•••BEARING,JEWELPT094213
    28•••PIN, .093X.11109431-02
    29••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    30••SCREW, #1-64 SLOT X .148 LONG23449-01
    31••POST, HAIRSPRING09418-01
    32••PINION, HANDPT089731
    33••HAIRSPR GEAR ASSEM.PT92891
    34••GEAR, RACK ASSEMBLYPT093031
    35•SCREW, #3-56 SLOT X .556 LONGPT093522
    36•WSHR,.100X.187X.025PT093502
    37•BACK, INDICATOR #25PT261601
    38•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    39•BEZEL/ CRYSTAL ASSEMBLYPT994191
    40••BEZEL IND., PLASTICPT234161
    41••CRYSTAL, #25PT066221
    42•SPR WSHR,1.593X2.020X.006PT06673A1
    43•HAND, #25PT083081
    44•HAND, #25 TELL TALEPT066611
    45•DIAL,STAT. 0-90 I.D.23679-01
    46•DIAL,REVERSE 25-441RPT11040R1
    47CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov