683M-1Z Metric Internal Chamfer Gage

683, 683M Internal Chamfer Gages, 0-90°
Millimeter Reading Dial Indicator Internal Chamfer Gage, 0-9.5mm Range, 0-90 Angle

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-9.5mm Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Made in America: Yes
  • Type: Chamfer Gage
  • Range (mm): 0 - 9.5mm
  • Dial Reading: For 0 -90 Degree Angles

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1BODY FOR CHAM/CSK GA23648-01
      2GAGE HEAD #683 0-3/823658-01
      3HEAD NUT, .37523675-01
      4NUT,INDICATOR COLLET23654-01
      5CONTACT POINT,1 1/4"PT06677C1
      6SPRING, .250X.306X2.125X.028X2 323647-01
      7INDICATOR (METRIC), FOR CHAMFER GAGE28387-01
      8•DIAL,STAT. MET 0-9026798-01
      9•DIAL,MOVABLE BRENCOR92078-01
      10•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
      11•SCREW, #4-48 SLOT X .231 LONGPT092841
      12•CAP, CASE STEM09903-01
      13•BEZEL CLAMP, PLASTIC23417-01
      14•SCREW, .140-40 CLAMP X .281 LONGPT111551
      15•RACK,13MM RANGE26797-01
      16•PIN, RACK GUIDE #25PT093421
      17•GUIDEPT093441
      18•SCREW, #1-64 SLOT X .154 LONGPT093482
      19•SPR, .139X.159X.050 RETURN09593-01
      20•BRIDGE/PLATE ASSEM.11268-01
      21••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      22••SCREW, #1-64 SLOT X .148 LONG23449-01
      23••POST, HAIRSPRING11287-01
      24••PINION, HANDPT089731
      25••HAIRSPR GEAR ASSEM.09289-R1
      26••GEAR, RACK ASSEMBLYPT118531
      27••BRIDGE SUB ASSEMBLYPT094101
      28•••BRIDGE #2509414-01
      29•••BEARING, JEWEL #25PT094221
      30•••BEARING,JEWELPT094212
      31•••PIN, .094X.30009425-02
      32••PLATE SUB ASSEMBLY09429-01
      33•••PLATE09396-01
      34•••BEARING,JEWELPT094213
      35•••PIN, .093X.11109431-02
      36•SCREW, #3-56 SLOT X .556 LONGPT093522
      37•WSHR,.100X.187X.025PT093502
      38•BACK, FLAT PLASTIC #25PT261601
      39•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      40•BEZEL/ CRYSTAL ASSEMBLYPT994191
      41••BEZEL IND., PLASTICPT234161
      42••CRYSTAL, #25PT066221
      43•SPR WSHR,1.593X2.020X.006PT06673A1
      44•HAND, #25PT083081
      45•HAND, #25 TELL TALEPT066611
      46CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov