/  Precision Measuring Tools  /  Precision Hand Tools  /  

Indicators & Gages

  /  

Special Function Dial Gages

 /

684-2Z

684-2Z Internal Chamfer Gage 63689

684, 684M Internal Chamfer Gages, 90-127°
Inch Reading Dial Indicator Internal Chamfer Gage, 0-1/2" Range, 90-127 Angle

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1/2" Range In case of wear, the gage may be adjusted to read the proper number.

Features
Specifications
Parts
3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65
Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Made in America: Yes
  • Type: Chamfer Gage
  • Range (in): 0 - 1/2"
  • Dial Reading: For 90 -127 Degree Angles

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1BODY FOR CHAM/CSK GA24651-01
      2GAGE HEAD #684 0-1/223661-01
      3SPRING, .250X.306X2.125X.028X2 323647-01
      4HEAD NUT, .50023676-01
      5NUT,INDICATOR COLLET23654-01
      6CONTACT POINT,1 1/4"06677-C1
      7INDICATOR06370-01
      8•CASE SUB ASSEMBLY22702-01
      9•SCREW, #4-48 SLOT X .231 LONGPT092841
      10•CAP, CASE STEM09903-01
      11•BEZEL CLAMP, PLASTIC23417-01
      12•SCREW, .140-40 CLAMP X .281 LONGPT111551
      13•RACK, .275 RANGE91300-01
      14•PIN, RACK GUIDE #25PT068481
      15•GUIDE09347-01
      16•SCREW, #1-64 SLOT X .154 LONGPT093482
      17•SPRING, .105X.125X.4688X.010PT066261
      18•SCREW, #1-64 SLOT X .082 LONGPT068391
      19•BRIDGE/PLATE ASSEM.24028-01
      20••BRIDGE SUB ASSEMBLY09400-01
      21•••BRIDGE #2509408-01
      22•••BEARING, JEWEL #25PT094221
      23•••BEARING,JEWELPT094213
      24•••PIN, .094X.30009425-02
      25••PLATE SUB ASSEMBLY09437-01
      26•••PLATE09389-01
      27•••BEARING,JEWELPT094214
      28•••PIN, .093X.11109431-02
      29••HAIRSPR GEAR ASSEM.PT092881
      30••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      31••SCREW, #1-64 SLOT X .148 LONG23449-01
      32••POST, HAIRSPRING09418-01
      33••PINION, HANDPT089731
      34••GEAR, RACK PINION ASSEMBLY11790-01
      35••GEAR, INTERMEDIATE ASSEMBLY11791-01
      36•SCREW, #3-56 SLOT X .556 LONGPT093522
      37•WSHR,.100X.187X.025PT093502
      38•BACK, INDICATOR #25PT261601
      39•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      40•BEZEL/ CRYSTAL ASSEMBLYPT994191
      41••BEZEL IND., PLASTICPT234161
      42••CRYSTAL, #25PT066221
      43•SPR WSHR,1.593X2.020X.006PT06673A1
      44•HAND, #25PT083081
      45•HAND, #25 TELL TALEPT066611
      46•DIAL,STAT 90-127 I D23681-01
      47•DIAL,REVERSE 25-441RPT11040R1
      48CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov