684-3Z Internal Chamfer Gage

684, 684M Internal Chamfer Gages, 90-127°
Inch Reading Dial Indicator Internal Chamfer Gage, 0-1" Range, 90-127 Angle

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1" Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (in): 0 - 1"
  • Dial Reading: For 90 -127 Degree Angles

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1BODY-CHAMFER GAGE23673-01
      2GAGE HEAD #684 0-1"23665-01
      3SPR, .640X.716X2.500 COMPRESSION23684-01
      4HEAD NUT, 1.00023677-01
      5NUT,INDICATOR COLLET23654-01
      6CONTACT POINT, 1/2"06677-01
      7STEM INSERT24661-01
      8INDICATOR06370-01
      9•CASE SUB ASSEMBLY22702-01
      10•SCREW, #4-48 SLOT X .231 LONGPT092841
      11•CAP, CASE STEM09903-01
      12•BEZEL CLAMP, PLASTIC23417-01
      13•SCREW, .140-40 CLAMP X .281 LONGPT111551
      14•RACK, .275 RANGE91300-01
      15•PIN, RACK GUIDE #25PT068481
      16•GUIDE09347-01
      17•SCREW, #1-64 SLOT X .154 LONGPT093482
      18•SPRING, .105X.125X.4688X.010PT066261
      19•SCREW, #1-64 SLOT X .082 LONGPT068391
      20•BRIDGE/PLATE ASSEM.24028-01
      21••BRIDGE SUB ASSEMBLY09400-01
      22•••BRIDGE #2509408-01
      23•••BEARING, JEWEL #25PT094221
      24•••BEARING,JEWELPT094213
      25•••PIN, .094X.30009425-02
      26••PLATE SUB ASSEMBLY09437-01
      27•••PLATE09389-01
      28•••BEARING,JEWELPT094214
      29•••PIN, .093X.11109431-02
      30••HAIRSPR GEAR ASSEM.PT092881
      31••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      32••SCREW, #1-64 SLOT X .148 LONG23449-01
      33••POST, HAIRSPRING09418-01
      34••PINION, HANDPT089731
      35••GEAR, RACK PINION ASSEMBLY11790-01
      36••GEAR, INTERMEDIATE ASSEMBLY11791-01
      37•SCREW, #3-56 SLOT X .556 LONGPT093522
      38•WSHR,.100X.187X.025PT093502
      39•BACK, INDICATOR #25PT261601
      40•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      41•BEZEL/ CRYSTAL ASSEMBLYPT994191
      42••BEZEL IND., PLASTICPT234161
      43••CRYSTAL, #25PT066221
      44•SPR WSHR,1.593X2.020X.006PT06673A1
      45•HAND, #25PT083081
      46•HAND, #25 TELL TALEPT066611
      47•DIAL,STAT 90-127 I D23681-01
      48•DIAL,REVERSE 25-441RPT11040R1
      49CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov