686-1Z External Chamfer Gage

686, 686M External Chamfer Gages, 90-127°
Inch Reading Dial Indicator External Chamfer Gage, 1/8-1/2" Range, 90-127 Angle

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 1/8-1/2" Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (in): 1/8 - 1/2"
  • Dial Reading: For 90 -127 Degree Angles

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1BODY, CHAMFER GAGE24651-01
      2GAGE HEAD #68623663-01
      3SPRING23647-01
      4HEAD NUT24024-01
      5NUT,INDICATOR COLLET23654-01
      6CONTACT POINTPT06677C1
      7INDICATOR SUB-ASSEMBLY05885-01
      8•SCREW, #4-48 SLOT X .231 LONGPT092841
      9•CAP, CASE STEM09903-01
      10•BEZEL CLAMP, PLASTIC23417-01
      11•SCREW, .140-40 CLAMP X .281 LONGPT111551
      12•PIN, RACK GUIDE #25PT068481
      13•GUIDE09347-01
      14•SCREW, #1-64 SLOT X .154 LONGPT093482
      15•SPRING, .105X.125X.4688X.010PT066261
      16•BRIDGE/PLATE ASSEM.24028-01
      17••BRIDGE SUB ASSEMBLY09400-01
      18•••BRIDGE #2509408-01
      19•••BEARING, JEWEL #25PT094221
      20•••BEARING,JEWELPT094213
      21•••PIN, .094X.30009425-02
      22••PLATE SUB ASSEMBLY09437-01
      23•••PLATE09389-01
      24•••BEARING,JEWELPT094214
      25•••PIN, .093X.11109431-02
      26••HAIRSPR GEAR ASSEM.PT092881
      27••SCREW, #3-56 PHILLIP X .263 LONGPT094244
      28••SCREW, #1-64 SLOT X .148 LONG23449-01
      29••POST, HAIRSPRING09418-01
      30••PINION, HANDPT089731
      31••GEAR, RACK PINION ASSEMBLY11790-01
      32••GEAR, INTERMEDIATE ASSEMBLY11791-01
      33•SCREW, #3-56 SLOT X .556 LONGPT093522
      34•WSHR,.100X.187X.025PT093502
      35•BACK, INDICATOR #25PT261601
      36•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
      37•BEZEL/CRYSTAL ASSEMBLYPT994190
      38••BEZEL IND., PLASTICPT234161
      39••CRYSTAL, #25PT066221
      40•SPR WSHR,1.593X2.020X.006PT06673A1
      41•HAND, #25PT083081
      42•HAND, #25 TELL TALEPT066611
      43•DIAL,STAT23682-01
      44•DIAL, MOVABLE #2511040-01
      45•CASE SUB ASSEMBLY22702-01
      46•RACK, .275 RANGE91300-01
      47•SCREW, #1-64 SLOT X .082 LONGPT068391
      49CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov