697Z Inside Dial Gage 52907

697,697M - Inside Dial Gages
Inside Dial Gage, 2-3/8" to 18" Range, .001" Grads, 0-20-0 Dial Face

These gages are used between two walls to check parallelism and also to take comparative measurements of internal diameters. There are ten rods and one extension furnished. The rods are marked to designate the approximate overall length of the gage. All measuring contacts are rounded. Tool can be set with a micrometer. The indicator bezel is rotated to adjust the dial in relation to the hand and has a non-breakable crystal. The movement of the dial indicator is approximately 5/32" (4mm). 2 3/8-18" Range, .001" Grad, 0-20-0 Dial The indicator bezel is rotated to adjust the dial in relation to the hand and has a non-breakable crystal. The movement of the dial indicator is approximately 5/32" (4mm).

Features
Specifications
Parts
3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65

Contact Starrett

Features

  • There are ten rods and one extension furnished
  • The rods are marked to designate the approximate overall length of the gage
  • All measuring contacts are rounded
  • Tool can be set with a micrometer
  • The indicator bezel is rotated to adjust the dial in relation to the hand and has a non-breakable crystal
  • The movement of the dial indicator is approximately 5/32" (4mm)
  • Rods of different lengths can also be furnished on request

Specifications

  • Made in America: Yes
  • Type: Dial Gage, Inside
  • Range (in): 2-3/8" to 18"
  • Graduations (in): .001"
  • Dial Reading: 0-20-0 / .040" Rev.

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov