/  Precision Measuring Tools  /  Precision Hand Tools  /  

Fixed Gage Standards

  /  

Thickness Gages

 /

806D

806D Thickness Gage Holder (Double End) 53040

806 Thickness Gage Holders
Thickness Gage Holder Only - Double End, Clamps Stock at Both Ends, for thickness from .001-.025" (0.03-0.5mm)

Starrett 806 thickness gage holders provide a handy, convenient means of rigidly holding single leaves or strips of thickness gage stock of any thickness from .001-.025" (0.03-0.5mm). Stock up to 6" (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock. This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until entirely used up. Thickness Gage Holder - Clamps Stock at Both Ends.

Features
Specifications
Parts
3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65
Contact Starrett

Features

  • Stock up to 6" (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock
  • This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until used up
  • Dull nickel finish
  • Size approximately 3/32" thick x 9/16" wide x 5-1/4" long (2.4 x 14 x 130mm)
  • Clamps have contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock

Specifications

  • Made in America: Yes

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov