/  Precision Measuring Tools  /  Precision Hand Tools  /  

Protractors & Angle Measurements

  /  

Vernier Protractors

 /

C359BZ

There is a newer version of this product available

C359FZ Precision Universal Bevel Vernier Protractor, Graduations in degrees through 360 Deg
Starrett 359 Precision Universal Bevel Vernier Protractors with fine adjustment are designed for precision measuring and for laying out angles.

C359BZ Precision Universal Bevel Vernier Protractor, Graduations in degrees through 360 Deg 51394

C359 Precision Universal Bevel Vernier Protractors with Fine Adjustment
Precision Universal Bevel Vernier Protractor, 7"/175mm

Starrett 359 Precision Universal Bevel Vernier Protractors with fi ne adjustment are designed for precision measuring and for laying out angles. The protractor is one of the most valuable and useful tools for the kit of every good toolmaker, inspector or machinist. 7" Blade, 5 min. or 1/12 Deg in Case.

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

Features
Specifications
Parts
Downloads
3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65
Contact Starrett

Features

  • The protractor is one of the most valuable and useful tools for the kit of every good toolmaker, inspector or machinist
  • Available with hardened 7" (175mm) or 12" (300mm) blades which can be rotated to the desired angle and adjusted to the desired length
  • Both the dial and the blade can be locked independently
  • An acute angle attachment is available
  • Flush surfaces on the base permits use on height gages
  • One side of the tool is flat so it can be laid on paper or on the work
  • Satin chrome finish on all reading surfaces - eliminates glare and resists rust
  • Sharp, machine-divided graduations
  • Machine-divided graduations read to 5 minutes (1/12 of a degree) and accuracy is finer than can be read
  • The most convenient, ultra-sensitive fine adjustment for precision setting

Specifications

  • Made in America: Yes
  • Blade Length (in): 7"
  • Blade Length (mm): 175mm
  • Graduations: 5 min. or 1/12 degree
  • Range (Deg): 0-360

Downloads


    2D Dimensional Drawing (PDF)
    .pdf

     

    118.24 kb

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review

    Parts

      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1CASE SUB ASSEMBLYNOT AVAILABLE1
      2SCREW, .140-40 SLOT X .165 LONGPT011811
      3PLATE, VERNIER01195-01
      4TURRETNOT AVAILABLE(2)1
      5CLAMP STUD SUB ASSEMPT047761
      6WSHR,.410X.969X.06204778-01
      7NUT,.406-40 CLAMP07629-01
      8CLAMP, BLADEPT133461
      9STUD SUB ASSEMBLYPT047831
      10STUD, DRIVING GEARPT047901
      11SPRING, GEAR STUDPT047911
      12CASE, TOP SIDENOT AVAILABLE(3)1
      13SCREW, #1-64 SLOT X .088 LONGPT01195A2
      14BLADE, 7" #359-7PT047801
      15STUD, END27750-01
      16SPACER, END STUD27751-01
      17INTERMEDIATE GEAR ASSEMBLY04788-01
      18STORAGE CASE ONLY, WOOD359ZZ-71NOT SHOWN

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov